CAREFULLY READ THESE USER INSTRUCTIONS BEFORE USING THIS VISOR

Applicable to products: FACE SHIELD

Manufacturer: Mowbray Leather Goods Ltd., 31-33 Beler Way, Melton Mowbray, Leicestershire, LE13 0DG United Kingdom

Notified body: SATRA Technology Centre Ltd., Wyndham Way, Telford Way, Kettering, Northamptonshire, NN16 8SD United Kingdom). Declaration of conformity: http://www.mowbrayleathergoods.co.uk/eu-declaration-of-conformity

These products have been shown to comply, through limited testing, with the Harmonised European Standard EN 166:2001 (see below).

This product is designed to provide some protection against contact with airborne droplets that may constitute a biological hazard. However, always remember that no item of PPE can provide full protection and care must always be taken while carrying out the risk-related activity. Never use this visor for protection against other hazards for which the product is not design for or tested against

PERFORMANCE AND LIMITATIONS OF USE – These products have been tested in accordance with EN 166: 2001 Clauses: 6 ¦ Design; 7.1.1 ¦ Field of vision; 7.1.2.1 ¦ Refractive powers; 7.1.2.2 ¦ Transmittance; 7.1.2.3 ¦ Diffusion of light; 7.1.3 ¦ Quality of materials; 7.1.4.2 ¦ Increased robustness; 7.1.5.1 ¦ Stability at elevated temperature; 7.1.7 ¦ Resistance to ignition;7.2.4 ¦ Droplets and splashes of liquids

FITTING AND SIZING – To put on and take off products, place the elasticated strap around forehead with rubber padding to the front. Only wear products of a suitable size that are correctly adjusted. Products which are too loose may not stay in place and if too tight will be uncomfortable.

COMPATIBILITY – To optimise protection, it will be necessary to use these products with suitable gloves/gowns/masks. In this case, before carrying out the risk-related activity, consult your supplier or supervisor to ensure that all your protective products are compatible and suitable for your application. Warning - Parts of the visor that come into contact with your skin may lead to allergic reactions. In this case please discontinue use and seek medical advice.

STORAGE AND TRANSPORT – When not in use, store the visor in a well-ventilated area away from extremes of temperature and direct sunlight. Never place heavy items on top of it. If possible, avoid excessive folding and preferably store it hanging vertically. If the product is wet, allow it to dry fully before placing it into storage.

OBSOLESCENCE - This visor has a shelf life of 3 years. Service life will depend on usage conditions but the visor should be disposed of and replaced if badly scratched or damaged in some way that prevents safe use

REPAIR – If the visor becomes damaged, it will NOT provide the optimum level of protection, and therefore should be immediately either replaced or repaired. Never use the damaged product.

CLEANING –Only use the following recommended cleaning treatment - Rinse with warm soapy water NEVER use solvent based cleaning agents. Do not use abrasives on the shields.           

MARKING – The product is marked with:

i.              Identification of the manufacturer and the product code/Article number